What's New?
.	April Journal
	Radiological and Nuclear Preparedness - CDC Public Health Grand Rounds Session

Upcoming Events
.	2010 Summer Professional Development School Internal Dosimetry 23 - 26 June 2010 Idaho State University, Pocatello, Idaho

15 March 2010

Answer to Question #1291 Submitted to "Ask the Experts"

Category: Lasers

The following question was answered by an expert in the appropriate field:

We will be installing a new manufacturing line which will have a laser station. What training does someone at our company require? Do we have to have a certified laser safety officer, and from where would training be provided?

The standard ANSI Z136.1 - Safe Use of Lasers will provide guidance in this area. Since you'll be using a Class IV laser, a laser safety officer (LSO) and training for both the designated LSO and the users is required. At this time, there is no such thing as a certified laser safety officer. If desired, please contact John Leonowich for more information or for assistance in arranging the appropriate training. John Leonowich, PhD Pacific Northwest National Laboratory

Answer posted on 20 October 2001. The information and material posted on this Web site is intended as general reference information only. Specific facts and circumstances may alter the concepts and applications of materials and information described herein. The information provided is not a substitute for professional advice and should not be relied upon in the absence of such professional advice specific to whatever facts and circumstances are presented in any given situation. Answers are correct at the time they are posted on the Web site. Be advised that over time, some requirements could change, new data could be made available, or Internet links could change. For answers that have been posted for several months or longer, please check the current status of the posted information prior to using the responses for specific applications.